GUIDES
PRODUCTS
Uretech RRL
Ironwork Reinstatement - Locking
Click here to view the Uretech RRL Technical data sheet.
Click here to view the Uretech RRL material reference.
Click here to view the Star Uretech Architects Manual.
Click here to contact us for the Uretech RRL safety data sheet.

Description
 Uretech RRL is a high performance, hybrid-polyurea system specially formulated for the locking of highway ironwork and concrete.


Click image to enlarge.

Applications
Uretech RRL is designed for use in the locking of roadways ironwork and concrete where the components are mixed together and used as a high performance locking compound.

Installation
Uretech RRL can be mixed in a standard cement mixer or a forced action mixer such as a Creteangle, Baron or Daines mixer. The aggregate should be tipped into the mixer first which is then started, and then the remaining components should be added in the order B, C & D and mixing continued until a uniform mix is obtained. This should take between 1 and 2 minutes depending on the mixer being used. The mixed aggregate should be poured into place, spread and fully compacted using a tamping block or, for the wearing surface, a float.

Packaging
Uretech RRL is available as a 20kg kit of pre-measured components.

Coverage
A single kit of Uretech RRL is sufficient to fill 0.009m³.

Disposal
The condition of this product will determine the required method of disposal. Used containers with fully cured product remaining around the edges or bottom of the container should have the hazard label removed or obscured before disposal as general building waste. Uncured/Liquid product should be disposed of as hazardous waste.


Why choose Uretech RRL?

Innovative, high performance product

Does not break up like bitumen based products

Cured product is not hazardous for disposal

Not hazardous for transport

GHS compliant labels and safety data sheet

Non-flammable

Chemical and water resistant

Zero VOCs

Zero solvents

Return to top of page.